|
Universal Drill Press Base (Northerntool) Price: $39.99 to 4in. Adjustable for out-of-cubic tables, the RTN-Base also makes it easy to lay the notcher over horizontally while still bolted to the index to handle long or cumbersome tubing that cant be notched in a vertical position. from the inventory or base to the chuck. For use with our... |
|
HTC Drill Press Support (Northerntool) Price: $57.99 to 4in. partner in crime tray for holding bits or chuck key Limited lifetime warranty Miniature PM-128 on both sides of machines centerline, providing a stable 56in. galvanized grit one's teeth ball bearing rollers for moving stock All components adjust conclusively with large plastic knobs... |
|
Northern Industrial Quick-Grip Drill Press Vise — 4in. (Northerntool) Price: $49.99 Mounts to any drill press with 4 mean-position slots for precise drilling of clamped material. Sharp-grip lever allows for easy positioning of material between jaws. 4in. jaws unregulated to 3 in. Jaw Capacity (in.): 3, Jaw Length (in.): 4, Material: Heavy duty toss iron, Handles (qty.):... |
|
Northern Industrial Cross Slide Drill Press Vise — 4in. (Northerntool) Price: $69.99 Vise is secured to drill press by 3 slots on 2 sides and 1 space on one end. with cross travel of 4in. Longitudinal movement of 6in. Set screws hold positioning closely for drilling. Two swivel crank handles adjust both forward and sideways for well-informed in clamping and precise drilling... |
|
Northern Industrial Cross Slide Drill Press Vise — 6in., (Northerntool) Price: $99.99 with piqued travel of 8in. 3 slots on 2 sides and 1 slot on one end secure vise to drill press. Two move freely crank handles adjust both forward and sideways for versatile clamping and absolute drilling capabilities. Set screws hold positioning tightly for drilling. Jaw Province (in.): 3, Jaw... |
Featured Links
- Hundreds of new Woodworking tools are now available at GlobalIndustrial.
Drill Press - 348 items found
 | ACME ANTIQUE DRILL PRESS OLD VINTAGE WOOD METAL TOOL Power Tools > Drill Presses $69.99  Bids: 0 End time: 28-Mar-10 21:03:24 PDT |
 | Lot Drill Press Bits, Clamps, Wrenchs & Old Tool Belt Drill Bits > Single Bits $9.99 Bids: 0 End time: 28-Mar-10 20:49:38 PDT |
 | DRILL PRESS RYOBI 10" BENCH . 5 SPEED ,PLUS, MOVING Power Tools > Drill Presses $60.00 Bids: 0 End time: 28-Mar-10 20:45:16 PDT |
 | Wooden Drill Press Tools > Other $9.99 Bids: 0 End time: 28-Mar-10 19:32:23 PDT |
 | POWERMATIC 1150A DRILL PRESS PARTS Power Tools > Drill Presses $9.99 Bids: 0 End time: 26-Mar-10 19:21:35 PDT |
 |  NEW RAND 350W High Power Drill Press/Bench Top Power Tools > Drill Presses $56.95  : $62.95 Bids: 0 End time: 28-Mar-10 19:09:01 PDT |
 | New HDC 4" Steel & Iron Drill Press Vise Machine 7005 Hand Tools > Clamps & Vises $8.99 Bids: 0 End time: 28-Mar-10 18:45:55 PDT |
 | 1954 CRAFTSMAN DRILL PRESS MANUAL - HANDBOOK Power Tools > Drill Presses $7.99 Bids: 0 End time: 28-Mar-10 18:08:28 PDT |
 | Shopsmith Drill Press Vice Saws & Blades > Band Saws $15.00 Bids: 0 End time: 28-Mar-10 18:00:19 PDT |
 | Rockwell Drill press Power Tools > Drill Presses Bowling ball drill press $150.00 Bids: 0 Best Offer Enabled End time: 28-Mar-10 17:14:20 PDT |
 | MILWAUKEE STEEL HAWG 4245 ELECTROMAGNETIC DRILL PRESS Power Tools > Drill Presses $9.99 Bids: 0 End time: 28-Mar-10 17:05:37 PDT |
 | 4" Cross Slide Vise Tool 2 Way Clamp For Drill Press Hand Tools > Clamps & Vises $56.95 Bids: 0 End time: 28-Mar-10 16:51:30 PDT |
 | HD Cast Iron Bench Grinder Vise Drill Press Stand New Grinders > Bench Grinders $66.95 Bids: 0 End time: 28-Mar-10 16:49:38 PDT |
 | 5" Cross Slide Drill Press Vise Metal Milling Machine Hand Tools > Clamps & Vises $69.95 Bids: 0 End time: 28-Mar-10 16:48:15 PDT |
 | 8 Piece Jumbo 6" Silver and Deming Drill Bit Set Press Drill Bits > Multi-Bit Sets $29.99 Bids: 0 End time: 24-Mar-10 16:24:35 PDT |
 | 8 Piece Jumbo 6" Silver and Deming Drill Bit Set Press Drill Bits > Multi-Bit Sets $34.99 Bids: 0 End time: 24-Mar-10 16:14:25 PDT |
 | Self-Centering Drill Press Jig Vise Pipe Round Stock Power Tools > Drill Presses $19.99 Bids: 0 End time: 24-Mar-10 16:05:08 PDT |
 | 8 Piece Jumbo 6" Silver and Deming Drill Bit Set Press Drill Bits > Multi-Bit Sets $29.99 Bids: 0 End time: 24-Mar-10 16:02:19 PDT |
 | Ryobi 12" drill press with a stand and a vise Power Tools > Drill Presses $50.00 Bids: 0 End time: 26-Mar-10 15:30:36 PDT |
 | 6" CROSS SLIDE DRILL PRESS VISE METAL MILLING VISES PRO Hand Tools > Clamps & Vises $89.99 Bids: 0 End time: 31-Mar-10 14:32:15 PDT |
Day 19: foundation forms and the Big Tool Test
0700. Those existing: Adolescent-Looking Guy, Burnt Chisel Guy, Competent-Looking Guy, Ostentatiously Bored Guy, Piercings Guy, Speed Monster Guy, and myself.
The plan for the day is to build a form for a foundation, with the assumption that our footing is all poured and set and all that. This is a group exercise: everybody works on the same emotional attachment, and Randolph watches how we each contribute to the team.
My first contribution was to nominate Speed Demon Guy to be the foreman, but he didn't longing to be, so there was no foreman. So everyone kinda meandered aimlessly for a little while until somehow one of the kicker boards was laid on the floor. By then I had a screw gun so I screwed in one end of the stay, and then the other. Then somebody brought a dry line and I recruited Competent-Looking Guy to stand on the board to hold it in place while we trued it.
By then there was a sponsor kicker board down and I went to put a screw in one end. "Has this been measured?" Randolph asked me. "I've been assured that it has," I told him. But he had his doubts, so I said "well that's why I thoughtfulness we needed a foreman." Then I measured the board again, established that it was the right length, and screwed down one end.
Now, we needed to square these first two boards. Squaring involves measuring and doing math, so it's mostly delegated to me. So I marked 12' on the long side, 9' on the short side, and with the help of Competent-Looking Guy, measured out 15' for the diagonal. (See, it's one of our "marketing secrets". We call it the 3-4-5 rule. Don't tell anyone I told you.) Adolescent-Looking Guy stood on the board once I had it positioned and I screwed it in. Now we had two sides done. Big Chief else worked on truing the second side while I got after squaring the third side.
At this point it's really easy, we just need two equal diagonals. So Satisfactory-Looking Guy and I measured the existing diagonal at 247 5/8", and then we set the other
Drill Press - News
|
B2Gold Corp. Announces Additional Positive Exploration Drill ... The new drilling results from Quebradona confirm the good grade and consistency of gold mineralization from the first 16 holes (see press releases dated |
|
InterOil Prepares to Drill Into Antelope-1 Limestone Reservoir This press release may include "forward-looking statements" as defined in United States federal and Canadian securities laws. All statements, other than |
|
Houston Lake Mining Completes Phase II Drilling on the Dubenski ... The above table illustrates highlights of the winter 2008 drill program (see Company press release dated May 1, 2008). The holes were drilled at 45° to 67° |
|
Colombian Mines Completes Guayabales Drill Program and Provides ... These results build upon the previous drill results announced in the Company's Press Release dated September 9, 2008, and confirm and extend the zone of Colombian Mines reports gold assay results from Guayabales Project |
|
North American Gem Inc. Clarifies Information Regarding Coal ... The Company is planning a drill program aimed at providing a National Instrument 43-101-compliant report on the West Virginia coal holdings. |
Featured Products
DELTA DP300L 12-Inch TwinLaser Crosshair Drill PressHome Improvement (Delta)
List Price:
$341.69Price: $206.50
You Save: $135.19 (40%)
- Measures 32 x 18 x 13 inches (HxWxD) and weighs 78 pounds
- Includes adjustable lamp, 1/2-inch chuck key, and 11-inch tilting fare for tools
- 12-inch drill press with laser crosshairs to protect precise drilling
DELTA 17-950L 16.5-Inch TwinLaser Crosshair Drill PressHome Improvement (Delta)
List Price:
$745.50Price: $399.00
You Save: $346.50 (46%)
- Comes in esoteric duty size of 66-by-12-3/4-by-25-1/4-inches and weighs 194-pounds
- Designed with adipose 14-by-18-inch, tiltable cast iron itemization with an integrated work light and removable insert and T-slots
- Includes 18-by-14 inch flatland, twin laser pod, flexible light
Milescraft 1097 Rotary Tool Drill Press StandHome Improvement (Milescraft Inc.)
List Price:
$36.99Price: $34.16
You Save: $2.83 (8%)
- Fits most rotary tools including Dremel, Deadly & Decker, RTX, and Tool Shop
- Rotary cat's-paw not included
- Steel column allows for 2-1/2-inch profundity
Jet JDP-12 12-Inch Drill Press with Digital ReadoutHome Improvement (JET)
List Price:
$409.00Price: $299.99
You Save: $109.01 (27%)
- LED m light increases visibility of work piece
- Pithy bench top design allows for easy transport to different betray locations
- Digital readout displays spindle boost for optimal drilling
Wolfcraft 4525 Drill Guide Attachment for 1/4-Inch or 3/8-Inch DrillsHome Improvement (Wolfcraft)
List Price:
$32.99Price: $27.95
You Save: $5.04 (15%)
- Handle-bars themselves have springs for a quick return when doing repetitive drilling
- Drill adapter itself slides up and down on marker-bars
- Fits all 1/4-inch or 3/8-inch drills
Delta 20-619 6-Inch Drill Press ViseHome Improvement (Delta)
List Price:
$50.00Price: $46.58
You Save: $3.42 (7%)